Handle Connector

Handle Connector

Patent Pending — connectable handle system.

The Handle Connector enables two or more handles to be joined in seconds, with no loss of strength compared to a single long handle. It enhances the modular taper lock handle system by allowing you to build custom lengths for increased leverage during bowl and hollow form turning.

Key Features

• Fits all SB Tool handle sizes
• Connect and disconnect handles in under 10 seconds
• Combine a Classic Handle with a Connectable Handle
• Combine any number of Connectable Handles together
• Mix and match any handle lengths to create a longer handle
• Increases leverage for greater tool control and less physical effort
• Dual taper lock connection for unmatched rigidity
• Supplied with Allen key to semi-permanently lock into the rear handle

Construction

Precision machined from hardened stainless steel for trouble-free, unlimited working life. The dual taper lock design ensures the connection between two handles is as strong as a single-length equivalent.

How to Use

Locate the connector in the rear handle first using the supplied Allen key. This semi-permanently locks the connector to the rear handle and allows the front handle to be hand-tightened on. Repeat for additional handles. To separate, twist the front handle off by hand and remove the connector with the Allen key. The entire process takes less than 30 seconds.

Length Combinations

• 2 Handles + 1 Connector = 3 length options
• 3 Handles + 1 Connector = 6 length options
• 3 Handles + 2 Connectors = 7 length options
• 4 Handles + 1 Connector = 9 length options
• 4 Handles + 2 Connectors = 12 length options

Note: Each combined handle and connector adds approximately 0.9 lbs compared to an equivalent single-length handle.